Description
Apply using a steel trowel, scraper or spackle tool. Painter’s Pal Skim-and-fill will shrink back slighyly in deep holes and imperfections. These areas will need a second application. Sand the surface when dry (minimum 4 hours after application depending on thickness). A 100 grit or finer sandpaper is recommended. After sanding Painter’s Pal Skim-and-fill it is essential that all the loose powder and dust from sanding is wiped off. Ensure the surface is free of any contamination before painting commences.
Provided all the sanding dust is fully wiped off and the surface is free of any contamination, then a primer is not necessarily required. However, priming is preferred. Should a primer be required due to powdery surfaces, then apply 1 coat of Bonding Liquid or Plaster Primer at the recommended spread rate befgore applying the finishing coats.
- Always keep out of reach of children and animals.
- Wear a suitable dust mask and goggles when preparing surfaces.
- Ensure good ventilation during application and drying.
- If accidental contact with skin, wash immediately with soap and water or a recognised skin cleaner.
- If accidental contact with eyes, rinse immediately with plenty of water and seek medical advice.
- Harmful if swallowed. Seek medical attention and do not induce vomiting.
