Description
- Designed to give a hard-wearing Satin/Matt coating over new or previously painted surfaces.
- Based on alkali resistant pigments and binder.
- Hard-wearing and easy to clean.
- Easy repaintable at any stage of life when re-coating becomes necessary.
- Prevent disintegration of cement based floors.
Correct surface preparation is essential for good product performance and all surfaces should be prepared as per the standard Painter’s Pal Preparation Specifications.
Do not apply when ambient temperatures are <4°C or >40°C. After correct surface preparation, stir thoroughly and apply a minimum of 2 coats of Painter’s Pal Garage Floor Paint by brush, roller or spray at the specified spread rate. Allow to dry between coats as per technical data.
- New or old concrete floors must be clean from all contaminants.
- Smooth surfaces should be etched with Dekro acid etching solution to create a key.
- Wash off with water to remove all traces of acid and allow to dry thoroughly
- Always keep out of reach of children and animals.
- Wear a suitable dust mask and goggles when preparing surfaces.
- Ensure good ventilation during application and drying.
- If accidental contact with skin, wash immediately with soap and water or a recognised skin cleaner.
- If accidental contact with eyes, rinse immediately with plenty of water and seek medical advice.
- Harmful if swallowed. Seek medical attention and do not induce vomiting.
